GSM–X LTE offers extensive communication functionality and support for multipath communication. The device comes with a cellular phone that supports data transmission using LTE* technology.
UNIVERSAL COMMUNICATION MODULE
GSM-X LTE is a multi-purpose communication module that offers extensive functionality and support for multiple communication paths.
It can easily find numerous applications, some of which can be implemented in parallel.
The module can be used in many existing and newly built installations. GSM-X LTE can receive event information from the connected alarm control panel to forward it to monitoring stations of security agencies or interested persons via mobile network or Ethernet*. Communication with the control panel takes place via its dialer (the module simulates the monitoring station) or properly configured control panel outputs connected to the module inputs.
The module can be used to implement remote control functions, such as arming the system or opening the gate, also using the mobile application.
GSM-X LTE can give a "new life" to some older alarm systems.
GSM-X LTE can interact with the INTEGRA and INTEGRA Plus series, via the RS-232 interface. It can report events from these control panels through all available paths: audio, SMS, Ethernet* and LTE**. In addition, the function of automatic creation og SMS notifications is available for INTEGRA Plus - content of the message is based on the event list.
Additionally, GSM-X LTE allows remote connection to the INTEGRA and INTEGRA Plus programs:
The device comes with an integrated cell phone. It has two SIM card slots and allows you to use services provided by different operators. If one of the cards causes any communication problems, the module automatically switches to the other card to maintain continuous communication. A very useful feature is the prepaid SIM card handling functions that allow you to check your account balance and set notifications in case it has dropped below the required minimum.
An undisputable advantage of the device is that it allows simple expansion by adding the
GSM-X-ETH Ethernet module and thus provides access to another communication channel i.e.
– Ethernet network.
* Data transmission via Ethernet - when GSM-X LTE is used with GSM-X-ETH
** Mobile data transmission via LTE/HSPA+/EDGE/GPRS (depending on the capabilities of the cellular network)
As regards reporting, information can be effectively transmitted using:
Where events are made available via mobile network or Ethernet*, the module supports two transmission formats:
Support for several transmission paths in one device guarantees fast and reliable transfer of information. You can use each of them independently, defining specific tasks to be carried out.
GSM-X LTE with the GSM-X-ETH module connected makes possible reporting through two independent paths: mobile network* or Ethernet (with priority setting option).
The device is constantly monitoring the status of connections with the monitoring station and, when necessary, it replaces one channel with the other.
GSM-X LTE offers the possibility of reporting to two autonomous monitoring stations, each of which, if necessary, may have two IP addresses.
* Mobile data transmission via LTE/HSPA+/EDGE/GPRS (depending on the capabilities of the cellular network)
The GSM-X LTE module makes it possible to send notifications to up to 8 telephone numbers. This function can be implemented by using:
The device can transmit notifications to the recipient through several independent paths. The event alert will be sent via all of the preprogrammed channels, therefore the information will reach the recipient even when one of them turns out to be unavailable.
The module can fully replace the analog line. In that case, it generates voltage states and line status signals (e.g. on-hook/off-hook) typical of the line and, after connection via mobile network is set up, it transmits signals coming from the analog line. When the line is unavailable, it diverts the voice calls to the mobile network. In the case of private branch exchanges (PBX), it functions as an additional external line, which allows you to optimize the cost of calls (to the mobile networks). The module can also filter calls, generate a ringing tone and caller ID information.
GSM-X LTE has 4 outputs that can be remotely controlled and activated in several ways:
In addition to controlling the alarm system, the GSM-X LTE module will be a perfect choice to implement automation functions, including control of lighting, gates, wickets, roller shutters/blinds, solenoid valves, etc. If needed, it will turn on heating, air conditioning, smoke extraction, watering and many other systems.
The application GX CONTROL allows:
PUSH messages give the user permanent access to information.
Importantly, configuration of the application is very simple, and so is connection with the module. All you have to do is send an SMS from the application level to the device and receive the configuration data in response. Another, equally convenient way is to scan the QR code that is generated in the GX Soft program or in a preconfigured application.
GX Soft is an advanced tool provided with a friendly and clear interface, intended for configuration as well as diagnostics of SATEL communication modules.
The module and the program interact locally (via USB) or remotely (via Ethernet* or mobile network).
* When GSM-X LTE is used with GSM-X-ETH
Thanks to the SATEL connection set-up service, you can enjoy many functionalities of GX CONTROL and GX Soft. Configuration of communication between the application / program and the GSM-X LTE module takes just a few moments, without any need to use external IP address or advanced network settings. When being sent, the data are encrypted using a sophisticated algorithm to ensure security of the transmission.
GSM-X LTE is compatible with the UpServ program, which enables the device to be remotely updated. This allows the installer to quickly add new functionalities without having to physically visit the premises and dismount the module.
My Account 
